Many customers buy back after the universal printer, because they do not know nozzle maintenance methods often result in head or plug is damaged, we all know that the best way to keep the nozzle in top working condition, you do something every day on the nozzle proper and effective routine maintenance, it will greatly reduce the likelihood of nozzle clogging, so please read the following and refer to the operation.
First, after the equipment is installed, as well as maintenance of equipment to enable the early maintenance performed on the nozzle
1, in order to head into the optimal functioning of the state, in universal printer before the official start to undertake the production business, make sure to use 1 to 2 days to the maximum extent possible to print some pictures, the picture is best CMYK 4 colors are used, and We should add C, M, Y, K 4-color stripes in the two sides of the screen to ensure that the four ink-jet head is always in the state.
2, when printing is best to clean the stations rightmost moisturizing sponge inside taken out together with its bracket.
Second, every day after work is completed on how to carry out maintenance head
A day after all print jobs completed, in order to maintain the nozzle in top working condition and avoid clogging the nozzle uv ink volatilization, please let the device overnight after the following manner nozzle maintenance.
1, turn off the universal printer.
2, first with special cleaning fluid to clean the moisture sponge, then pour the cleaning solution on the sponge to make it wet.
3, the head moved back to the far right of the nozzle and the cleaning station and moisturizing sponge closely.
4, to maintain this state so that the device overnight.
Third, the treatment was found clogging the nozzle after a slight
1, in the printing process found clogging the nozzle after a slight hesitation press the PAUSE button to pause the print job, and then using a syringe or manual pump the ink from the nozzle nozzle cleaning performed, after cleaning must use a plastic squeeze bottle to the nozzle surface spray some cleaning fluid to wash away residual ink.
Note: Do not use the manual pump too much force, otherwise they will be damaged due to excessive pressure nozzle.
2, promptly and thoroughly decisive treatment nozzle clogging slightly for holding the nozzle optimum working condition for a long time the printing process is very important!
3 In addition, it is necessary to carefully check the sprinkler nozzle clogging the situation and find the reason.
Fourth, the device is expected to be more than 48 hours of treatment when not used
If the device is expected to be more than 48 hours is not in use, you must flush the print head clean, otherwise the nozzles of the ink because of the gradual evaporation of the solvent and dry, in serious cases, will cause irreversible damage to the nozzle. Approach is as follows:
1, closed universal printer.
2, the cleaning head to the extreme left position, below the nozzle to put a corrosion-resistant container for containing cleaning liquid.
3, using a glass syringe out or directly pour the ink sub tank, and then use special cleaning fluid to the sub tank clean.
4, the ink supply nozzle on the tube pulled out, and then extract 40ml glass syringe with special cleaning fluid cleaning nozzle, a total of 2 times. Finally, do not put the nozzle in the cleaning solution remaining blown clean, be sure to leave enough cleaning fluid inside the nozzle because the nozzle cleaning fluid can play a moisturizing effect.
5, the treated corrosion-resistant nozzle into a clean container and sealed (with plastic wrap on the good) can be stored up after a month or so